company news about Do you know the procedure of the grooving machine before operation?

1. Before the equipment works, it is necessary to carefully check whether the knives and nuts and the screws of each part are firm, so as to avoid accidents caused by looseness. If looseness is found, it is necessary to tighten it in time.
2. Pay attention to the cutting direction when installing the tool to avoid accidents caused by reverse installation; the tool is clockwise.
3. For the work before feeding the slotting machine, it is necessary to confirm whether the pneumatic device is opened and pressed, and the human body is prohibited from approaching the cutter.
4. When the slotting machine breaks down, the power supply should be disconnected immediately, and the work should be stopped. Professionals are required to repair and deal with it. If there is a problem with the slotting machine, it is not allowed to start work.
5. Before grooving, it is necessary to check whether the tool has problems such as iron nails, sandstone, blunt knife, cracks, etc., so as to prevent the damaged tool from flying out and hurting people.

6. The power supply of the equipment must be cut off when cleaning the equipment, lubricating oil, removing and replacing saw blades, and cleaning shavings from the knife edge.
7. The operation of the slotting machine requires designated personnel to operate, adjust, repair and maintain, and it is strictly forbidden to operate the equipment for those who are not familiar with the equipment.
8. When the slotting machine operator operates the equipment, he needs to wear earplugs, goggles, gloves and other labor protection equipment to avoid injury.
9. The maintenance of the equipment needs to be operated in accordance with the instructions provided by the manufacturer. If you are not sure, you should consult a special person to avoid unnecessary accidents.
10. It is recommended that the slotting machine only work on one material. Long-term mixed material operation will reduce the service life of the slotting machine and accelerate the aging of parts.
The above points are the safety procedures before the slotting machine works. Only when the safety is in place and the equipment is maintained, can the production be guaranteed and the efficiency improved!